Saturday I visited the Maker Faire in Eindhoven. Jeroen of the Frysklab team invited me to come along, when their mobile FabLab was parked in our courtyard for Smart Stuff That Matters. They had arranged a touring car to take a group of librarians and educators to the Maker Faire, and invited me to join the bus ride. So I took a train to Apeldoorn and then a taxi out to a truck stop where the bus was scheduled to stop for a coffee break, and then joined them for the rest of the drive down south.

The Maker Faire was filled with all kinds of makers showing their projects, and there was a track with 30 minute slots for various talks.
It was fun to walk around, meet up with lots of people I know. Lots of projects shown seemed to lack a purpose beyond the initial fascination of technological possibilities however. There were many education oriented projects as well, and many kids happily trying their hand on them. From a networked agency point of view there were not that many projects that aimed for collective capabilities.

Some images, and a line or two of comment.

En-able, a network of volunteers printing 3d-printed prosthetics, was present. Talked to the volunteer in the image, with his steam-punk prosthetic device. They printed 18 hands and arm prosthetics for kids in the Netherlands last year, and 10 this year until now. Children need new prosthetics every 3 to 6 months, and 3d printing them saves a lot of costs and time. You even get to customise them with colors, and your favourite cartoon figure or super hero.

3d printing with concrete, a project in which our local FabLab Amersfoort is involved. Didn’t get to see the printer working alas.

Novelty 3d printing of portraits.

Building your own electronic music devices.

Bringing LED-farming to your home, open source. Astroplant is an educational citizen science project, supported by ESA.

Robot football team versus kids team. Quite a few educational projects around robotics were shown. Mostly from a university of applied sciences, but with efforts now branching out to preceding education levels. Chatted to Ronald Scheer who’s deeply involved in this (and who participated in our Smart Stuff That Matters unconference).

A good way to showcase a wide range of Microbit projects by school children. I can see this mounted on a class room wall.

An open source 3d-printed, arduino controlled android. But what is it for? Open source robotics in general is of interest of course. There were also remote controlled robots, which were quite a lot of fun, as the video shows.

At the fringe of the event there was some steam punk going on.

Building with card board boxes for children. Makedo is an Australian brand, and next to their kits, you can find additional tools and elements as 3d printable designs online.

The Frysklab team presented the new Dutch language Data Detox kit, which they translated from the English version the Berlin based Tactical Tech Collective created.